Close

Results 1 to 1 of 1
  1. #1
    Registered
    Join Date
    04-28-2014
    Location
    South Carolina
    Posts
    1

    Default Rodney D Holiday Utility Inspector

    RODNEY D. HOLLIDAY
    Turbine Generator Specialist/Site Supervisor

    Consultant

    Cell # 843-793-7971

    Home 843-771-5789
    E-mail - rholliday66@gmail.com

    DOB – 03-15-1964


    EDUCATION & PROFESSIONAL TRAINING:

    GE Turbine and Turbine Generators Training, Schenectady, NY
    GE Supervisor Training, Wilmington, NC
    NCCER Certified Millwright
    NCCER Certified Rigger
    GE and QCI Mechanical Craftsman Course
    Certified ITH and Tensioning Equipment for Gas Turbines
    Certified Hytorc Operator
    Training on Riverhawk Coupling Bolt Tightening Device
    Certification to Operate: 35, 45 and 50 ton rough terrain cranes, 5 – 100 ton overhead cranes,
    Backhoe JLG’s 40’, 60’ and 80’ and LULL 6000.

    Steam Turbines 11 years
    Gas Turbines 8 years
    Summary: 19 years experience with Power Generating Turbine Maintenance, Installation and Commissioning in Power Plant and Industrial Environments
    Experience with three new Installations of Steam Turbines and
    Seven new Installations of Gas Turbines and several major overhauls
    Instalation of a Natural Gas compressor station SEE Below
    Experience in commercial and residential construction and painting

    PERTINENT EXPERIENCE:

    Mitsubishi Front Royal 2013 - 2014 Currently installing a Mitsubishi Three cylinder
    TFA Virginia Re-heat Steam Turbine 573 MW, Three 501-G
    GT’s 262 MW Four Generators, and Pipe

    Mitsubishi Covington
    TFA Virginia 2012
    Installed a Double Extraction Condensing
    Steam Turbine & Generator 87 MW
    AMERICAN POWER GENERATION SEVICES
    Outage Manager / Owners Representative

    Odessa TX 2012
    Duties- Managed outage for OEPP
    Odessa Ector Power Partners

    • Managed Logistics of the Outage
    • Managed Contractors
    • Managed Schedule’s
    • Managed Equipment
    • Managed Turbine overhaul


    PEAKNET Inc. Houston TX
    Owners Representative Valladolid 2012
    Valladolid 111 Energy Center Mexico

    Duties- Oversee Contractor on 230 MW Toshiba Steam
    Major.

    • Perform Inspections
    • Enforce Toshiba procedure’s
    • Give Mechanical Instruction
    • Procure pertinent Documentation


    EMS USA Inc. Houston TX 2011
    Superintendent Philippines
    Supervised alignment on two ABB Steam Turbines in
    The Philippines.



    NAES Constructors Inc. Houston, TX 2011
    Project Manager Managed several Steam Turbine Outages currently
    Planning Outage work in PA and NJ – Also changed
    Out a complete set of Inlet Coolers on two GE 7 – FA’s

    Pro-Energy Services Venezuela 2010
    Mechanical Start up
    Superintendent

    Served as Mechanical Start up Superintendent
    Two lm-6000’s and one 7-EA GE Turbines


    L-Con Constructors Co.
    General Superintendent

    Texas Gas































    QCI, Inc.
    Encore Power Services

    Supervisor/Leadman/Journeyman Millwright




    Charles Blanchard Construction Co. Inc.
    Superintendent













    D. R. Horton, Inc.
    Superintendent/Warranty Coordinator








    Imperial Enterprises, Inc.
    (Self Employed)
    Project Manager/Superintendent















    Qualified Contractors, Inc.
    Journeyman Millwright




    Charleston Naval Shipyard
    W.G. 9 Painter/Painting Contractor




    Primesouth, Daniels Construction,
    OPI, Inc.
    Journeyman Millwright/Maintenance Mechanic

    Houston, TX
    Isola Miss.

































    Wilmington, N

    Kingwood, TX





    Charleston, SC
















    Charleston, SC









    St. George, SC

















    Wilmington, NC
    Virginia




    Charleston, SC
    Scotland UK





    Charleston, SC






    2008 – 2010

    Served as a Site Supervisor in the green field construction of a GE Frame 6 B Gas Turbine and Generator.

    Served as a General Superintendent in the greenfield construction of a natural gas compressor station. Responsible for:

    • Installation of a Solar 100 gas turbine rated at 15,000 Hp
    • Installation of the natural gas compressor driven by this gas turbine
    • Erection of the inlet filter as well as the inlet ductwork
    • Alignment of Solar Turbine and all other
    • Mechanical equipment
    • Erection of the exhaust ductwork
    • Erection of cooling tower
    • Setting of the fuel gas skid
    • Setting of the auxiliary generator
    • Setting of all other mechanical equipment
    • Torqued all flanges
    • Pressure/hydro testing of all process
    • Piping

    Served as General Superintendent for the disassembly of two 150 MW G.E. steam turbines. Interfaced with the union craftsmen, provided technical direction as necessary for this precision work. Provided oversight for final shipping, load out and transport of the TG components.


    2006 – 2008

    First line supervisor for disassembly and reassembly of GE steam and gas turbines. Steam Turbines 10 meg and as large as G-2 650 megs Gas Turbines frame 5, 6, 7-EA, 7-FA Journeyman millwright for turbine and generator maintenance.


    2006

    Managed all aspects of commercial construction projects. Coordinated subcontractors and suppliers. Provided quality control. Worked with designers, engineers and architects to ensure project was built in accordance with contract documents. Generated daily/weekly progress reports. Reviewed subcontracts and implemented
    Operations.







    2004 – 2006

    Managed warranty issues and customer service. Conducted working audits, submitted reports and recommendations on all work. Maintained files, charts and reports on work in progress and inspections. Investigated and reported on problem areas and special projects. Submitted reports to design, planning and estimating to initiate all work.

    1997 - 2004

    Small business start-up. Responsible for daily field and office operations of a construction company handling commercial and residential projects. Provided on-site management and quality control, coordinated and scheduled subcontractors and suppliers. Worked closely with architects and engineers in reviewing drawings and specifications. Scheduled, conduced and participated in project meetings. Oversaw cost control, coding and payroll. Prepared budgets, estimates, bids, proposals, schedules, contracts, subcontracts and work scopes. Negotiated subcontract agreements, purchase orders and general contracts with clients. Self employed painting contractor.

    1990 - 1997

    Greenfield construction, disassembly and reassembly of GE steam and gas turbines and generators.
    Greenfield construction of two 250 meg Steam Turbines and Gas Turbines frame 6 and frame 5.

    1987 – 1990

    Responsible for sandblasting and painting naval surface craft and nuclear submarines.




    1984 – 1987

    Responsible for major and minor overhauls of GE steam turbines and generators.














    Attached Files Attached Files

Similar Threads

  1. Pat Reynolds, Utility, vendor/ chief inspector
    By Pat Reynolds in forum Project Chief
    Replies: 0
    Last Post: February 16th, 2014, 06:12 PM
  2. Sherry B Luquette - Utility 2 Inspector
    By Imacajunme in forum Utillity
    Replies: 0
    Last Post: January 26th, 2014, 04:23 PM
  3. DEBRA.MIGUES Utility Inspector
    By DEBRA.MIGUES in forum Utillity
    Replies: 0
    Last Post: January 9th, 2014, 09:34 PM
  4. utility inspector
    By Kevinmcdaniel in forum Utillity
    Replies: 0
    Last Post: January 4th, 2014, 09:24 PM
  5. Voltage Settings for Holiday (Jeep) Detector...
    By Mark in forum Inspection Related
    Replies: 0
    Last Post: December 18th, 2013, 08:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •